How to Do a Broken Car Key Repair
You're in a rush to get your work done and put your keys in the ignition. Then you try to turn it around, and it breaks in the lock!
There are a few ways you can try to solve the issue before calling a locksmith. Here are a few quick fixes:: 1. Super Glue.
1. Call for a locksmith
A damaged key in the lock is among the worst things a car owner could face. This situation is even more painful if it occurs when the driver is trying to get somewhere or to drop off the child. In this case it is essential to act swiftly and try to release the stuck key.
It is best to call an experienced locksmith for this job for this job, as they will be able to use the appropriate tools to remove the broken key and not harm the lock. Many people are looking for something thin and stiff, such as paperclips or toothpicks. But it is not the best choice since they are too large to fit in the lock.
A much better solution is to search for an tweezers set, as these are quite thin and can easily reach the key hole in the lock. They should also be rigid enough to grasp the broken part of the key and then pull it out. If you don't own tweezers then you might consider searching for a set of key extractors, which are usually sold in auto parts stores. These are flat and narrow with small hooks that can be placed into the key hole and grip on the broken piece of the key.
Another option is to find an magnetic key hook that is able to attach to the metal in the lock and pull it out. This is not always the best option because it could get caught under the lock and cause further damage to the lock. In such a scenario, it is best to contact an expert locksmith.
Some people try to join two pieces of a broken car key using superglue order to take it out of the lock. However, this can be very risky as the bits of metal could snag on to one another and break apart again later on. It is also essential not to turn the key, as this can cause further damage to the lock or the ignition cylinder. Get a locksmith professional to repair the broken key immediately.
2. Drill a hole
Sometimes a key is broken inside the lock, and even with an extra key, you may not be in a position to gain access to your vehicle. Drilling out the lock may be the best option in these instances.
First, you will want to ensure that the key hole is set up to accept a standard tumbler car key. If it isn't, you won't be able to drill out the pins without damaging the door and potentially destroying the lock mechanism.
It is important to note that you'll drill through the outer layer of plastic as well as an inner layer of metal. You can drill through these layers using a the smallest drill bit but you should not go any deeper. If you drill to deep, it could cause damage to the wiring harness or cause the drill bit to stick within the hole.
Wearing a mask or other protective equipment is advised when using a drill. This will stop dust and dirt from getting into your lungs.
In the end, it's recommended to have two pairs of pliers and tweezers available in case the damaged piece of the key is sticking out of the lock. If there is enough of the key to be able to grasp with tweezers or pliers, this could suffice to pull it out of the lock. If not, you'll need to use a tool such as this to wedge it into the lock and then turn it towards the key to grab and remove it.
3. Drill a nail
You can be left stranded when you cut your key in half. There are a variety of ways to fix the issue without having to hire a locksmith. The first option is to utilize a screw or nail. repair car key can find these at home or at a hardware store. It is best to choose a nail as thin and long as you can. This means you can put it into the hole, and then apply epoxy glue to join the two pieces. Make sure that the back of the nails is flat. This will help it to fit into the cut slot of the key. This will stop it from moving, and could even prevent it from breaking again in the future.
4. Super Glue
A lot of motorists make use of DIY techniques like using super glue try and fix a broken car key, but this is a risky option to make. You could cause damage to the lock, and then have to shell out more money to replace it.
First, take a look at the broken keys and ensure that they match each other in terms of size. This step is essential to ensure that all the pieces that have been glued are aligned correctly and that the key will fit inside the lock once they've been put in place. Then, using a piece of fine-grit paper or a metal filing, smooth the edges of the broken pieces. This will make the glue bond stronger and decrease the chance of a key becoming loose in the future.
After polishing the edges, apply a small amount (about the size of a pea) of super glue on the other side. Use only a small amount of super glue, as excessive amounts can make the key too large. It will then be difficult to fit into the lock. After lining up the two pieces of the key that broke then press them together. After a few moments, the glue will begin to set and join the key fragments.
A bobby-pin or paperclip can also be used as a tool to remove a damaged key from the lock. They can be cut like a pick and then inserted into the lock. This method is particularly helpful if the break is near or within the keyway or lock hole.
A car key that is damaged and has electronic components will need a new key from the dealer or a professional locksmith. The key will have to be reprogrammed using a new code and the chip in the key will need to be replaced. If the metal or shell of the key is damaged it will be necessary to have a new cut. You won't need to reprogramme or replace electronic components.